Concrete Breakdown & Removal
Right after the ancient Romans uncovered the application of concrete in constructing the royal Roman Kingdom, concrete has attained tremendous reputation which is now the most widely-used building material all over the world. It’s utilized in building high and skyscrapers to paving humble and small pathways. But at times, there are situations whereby a concrete project that cannot be patched up by any kind of compound and resurfacing product. The best plan, to save money and time, would be to opt for concrete removal.
There are actually some situations when the destruction in your concrete could be repaired by resurfacing; however there are actually some conditions whereby complete replacement or remover will be much affordable.
Listed below are some conditions that call for concrete removal:
Deep, widespread cracks
Broad cracks cannot be returned to its original state irrespective of how many resurfacing one does. The cracks establish from lower sub quality used, erosion, subjection to intense weight and all others.
Slabs that sink
This is certainly brought on by a sub quality which is not well-prepared. It might be that a loose soil was employed for the sub quality or maybe it was compacted. Storm water sneaks under the concrete surface; therefore it becomes hollow and unsupported. At some point, the slab would sink, particularly when going through heavy weight or load.
Spilling and Spitting
Resurfacing might handle the situation, however is not meant to last. Complete replacement and removal is the best solution to this problem.
Here are the different kinds of concrete removal procedures that are utilized by demolition companies
1. Cutting method
This process reduces the concrete into total depth perimeter to split it for removal as a unit. The weight carrying capacities of the transporting and lifting equipment employed in the process decide the optimum size of the unit. Since the volume of concrete is taken out as units, the managing of debris is so efficient. Without any heat, dust and vibration are made in such process. This process is grouped into stitch drilling, diamond saws, thermal tools and abrasive water jets.
2. Blasting method
This method utilizes gasoline that rapidly expands in an enclosed space within a few boreholes. This method can cause controlled fractures that result in the elimination of the concrete. An example of this method is explosive blasting, that is able to demolishing mass layers of concrete. The derived debris is small and is easily managed.
3. Impacting method
This method uses force of recurring strikes on surface area of the concrete which will fracture and shatter it into pieces. This process makes use of either a boom-mounted breaker or a hand-held breaker.
4. Presplitting method
This method uses force produced by a wedge-like tool or equipment on boreholes with a made pattern to break the surface of the concrete in a regulated manner so as to allow concrete removal. This process uses hydraulic splitters and chemical-expansive agents.
5. Crushing method
This method applies machine with jaws which are hydraulically powered to remove and crush the concrete. Samples of these machines are the boom-mounted mechanical crusher and the mechanical crusher.
Deciding and performing any of these kinds of concrete removal processes is challenging and labor-intensive, especially when you don't have any knowledge in handling the heavy machines that are needed in accomplishing these jobs. To save lots of stress and resources, it is best you leave the job for qualified professionals. Contact any demolition company near you for a quote.
Please Call Us At 832-602-2971 Today or Fill Out Our Hassle Free Quote Form